Setting The Real-Time Clock - Honeywell ADEMCO LYNX XL Series Installation And Setup Manual

LXL-1010 Installation and Setup Guide

Setting the Real-Time Clock

Set the time and date by doing the following:
1.
(Security Code)
2. Press [∗] when the time/date is displayed.
A cursor appears under the first digit of the hour.
To move cursor ahead, press [
• Enter the 2-digit hour setting.
• Enter the 2-digit minute setting.
• Press [1] for PM or [2] for AM.
• Enter the last two digits of the current year.
• Enter the 2-digit month setting.
• Enter the 2-digit day setting.
3. To exit, press [∗] when cursor is at the last digit, or
wait 10 seconds.
12–4
www.PDF-Zoo.com
+[#] + [6] [3]
∗
]. To go back, press [#].
firealarmresources.com
Alpha Display:
DISARMED
READY TO ARM
TIME/DATE SAT
04:04PM 10/17/00
Current time display
TIME/DATE SAT
04:04P2000/10/17
Time/date editing display