Maintenance; Environmental Protection - Evolution R185SMS-Li Original Instructions Manual

www.evolutionpowertools.com
EXTRACTION PORT ADAPTOR TUBE
Use the Adaptor Tube to connect the extraction port of
the machine to suitable commercial workshop vacuum
extraction equipment (not supplied) which have ø30mm
internal bore hoses or inlet ports.

MAINTENANCE

Note: Any maintenance must be carried out with the
machine switched off and the battery removed.
Check that all safety features and guards operating correctly
on a regular basis. Only use this machine if all guards/safety
features are fully operational.
All motor bearings in this machine are lubricated for life. No
further lubrication is required.
Use a clean, slightly damp cloth to clean the plastic parts of
the machine. Do not use solvents or similar products which
could damage the plastic parts.
If the LED becomes obstructed, clear debris with compressed
EN
air.
WARNING: Do not attempt to clean by inserting pointed
objects through openings in the machines casings etc.
The machines air vents should be cleaned using
compressed dry air.
Excessive sparking may indicate the presence of dirt in the
motor or worn out carbon brushes. If this is suspected have
the machine serviced and the brushes replaced by a qualified
technician.

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your Local Authority or retailer for recycling advice.
Environmental damage through incorrect disposal of the
batteries / rechargeable batteries.
Batteries /rechargeable batteries may not be disposed of
with the usual domestic waste. They may contain toxic heavy
metals and are subject to hazardous waste treatment rules
and regulations. Please dispose of batteries according to the
relevant local requirements.
Remove the battery from the product before disposal.
29