Operation; Maintenance - Evolution R150 RCP-Li Original Instructions Manual

www.evolutionpowertools.com

OPERATION

Variable speed trigger
To Switch On: Press and hold down safety lock off
button. Then pull the variable speed trigger.
To Switch Off: Release the trigger.
Adjusting the speed
The speed of the switched-on power tool can
be variably adjusted, depending on how far the
variable speed trigger is pressed. Light pressure
on the variable speed trigger results in a low
speed. Further pressure on the trigger results in a
high speed.
Application
WARNING: Always hold the power tool firmly
with both hands. Whenever possible, clamp
the workpiece to be cut in a vice. Use the saw's
contact plate for cutting support. This helps to
reduce vibrations. It also enables square cuts to
be made. Never touch the saw blade straight after
use as it may be very hot.
Sawing metal
When sawing metal, use lubricant along the
cutting line. This stops the material from
overheating.
Sawing wood
Place the saw square on the workpiece.
Guide the saw with uniform pressure through
the wood, pressing the contact plate against the
workpiece in the process.

MAINTENANCE

Keep the machine clean all the time.
Clean the housing only with a damp cloth. Do not
use any solvents. Dry thoroughly afterwards.
Note: Do not use cleaning agents to clean the
plastic parts of the tool. A mild detergent on a
damp cloth is recommended. Water must never
come into contact with the tool.
ENVIRONMENT
Never place any electric power tools in your
household refuse.
To comply with European Directive 2012/19/EU
concerning old electric and electronic equipment
and its implementation in national laws, old
electric power tools have to be separated from
other waste and disposed of in an environment-
friendly fashion, e.g. by taking to a recycling
depot.
Recycling alternative to the return request:
As an alternative to returning the equipment
to the manufacturer, the owner of the electrical
equipment must make sure that the equipment
is properly disposed of if he no longer wants to
keep the equipment. The old equipment can be
returned to a suitable collection point that will
dispose of the equipment in accordance with the
national recycling and waste disposal regulations.
This does not apply to any accessories or aids
without electrical components supplied with the
old equipment.
Environmental damage through incorrect disposal
of the batteries / rechargeable batteries.
Batteries /rechargeable batteries may not be
disposed of with the usual domestic waste. They
may contain toxic heavy metals and are subject to
hazardous waste treatment rules and regulations.
Please dispose of batteries according to the
relevant local requirements.
Remove the battery from the product before
disposal.
11
EN