When A Sysmac Link Unit Or Sysmac Net Link Unit Is Used - Omron SYSMAC C200HW-PCU01 Operation Manual

Mounting the PC Card Unit

4-4-2 When a SYSMAC LINK Unit or SYSMAC NET Link Unit is Used

1, 2, 3...
Note Always mount the SYSMAC LINK Unit or SYSMAC NET Link Unit in the slot on
the left of the C200HX/HG/HE CPU. Then, mount the PC Card Unit in the slot on
the left of the SYSMAC LINK Unit or SYSMAC NET Link Unit. If these Units are
mounted in other slots, the Bus Connection Unit cannot be mounted.
1. Hitch the claw on the upper edge of the bottom of the PC Card Unit to the
CPU Backplane as shown in the figure below.
2. Insert the connector on the PC Card Unit all the way into the connector on
the CPU Backplane.
When the PC Card Unit is correctly installed a click will be audible. Insert the
connector until the click is heard.
Section 4-4
35