Setting The System Switch; Opening The - Omron SYSMAC C200HW-PCU01 Operation Manual

Setting the System Switch

Meaning of Indicators
4-3

Setting the System Switch

4-3-1 Opening the Front Cover
Name
RUN Green
Flashing
ERR Red
CARD1 Orange
CARD2 Orange
FMT Orange:
Note 1. The meaning of the status "the Unit is operating" differs depending on the
system.
When only the PC Card Unit is used: Status in which the CMCR instruction
can be executed in the ladder program.
When Ethernet is used: Status in which IP protocol can be used (The RUN
indicator may light even when the C200HX/HG/HE is stopped.)
2. The RUN indicator flashes when data is being read or written between the
PC Card Unit and the C200HX/HG/HE. When the card is removed or
inserted the indicator may go off temporarily.
3. The ERR indicator lights if the Ethernet setup file is incorrect or no Ethernet
card is mounted when the Ethernet is being used.
The system switch is used to set the PC Card Unit. Use this switch to set the
startup mode, memory card format, format slot, and operating level. The system
switch can also be used to start formatting a memory card.
Before setting the system switch, open the front cover as shown below.
Color Description
Unit running
Data is being
read or written
Error
Card 1
Card 2
Format mode:
Flashing Format
standby
Lit Formatting
Section 4-3
Meaning (when lit)
Lights when the Unit is
operating (see note 1) or when
files are being transferred.
(See note 2)
Lights when an error has
occurred in the Unit
(see note 3).
Lights when PC card socket 1 is
being accessed.
Lights when PC card socket 2 is
being accessed.
Lights when the Unit is in PC
Card formatting mode.
29