Installing the Bus Connection Unit
4-5-2 Installing the C200HW-CE012
Name and Function of Each
Component
Installation Procedure
1, 2, 3...
38
Before installing the C200HW-CE012 Bus Connection Unit, mount the C200HX/
HG/HE CPU, SYSMAC LINK Unit or SYSMAC NET Link Unit, and PC Card Unit
in the correct slots in the CPU Backplane.
The name and function of each component are described below.
CPU bus interface connector 1
CPU bus interface connector 2
CPU bus interface connector 1
This connector connects to the CPU bus interface connector on the PC Card
Unit.
CPU bus interface connector 2
This connector connects to the CPU bus interface connector on the SYSMAC
LINK Unit or SYSMAC NET Link Unit.
CPU bus interface connector 3
This connector connects to the CPU bus interface connector on the C200HX/
HG/HE CPU.
1. Connect the CPU bus interface connectors 1, 2, and 3 all the way into the
three corresponding connectors on the Bus Connection Unit as shown in the
figure below.
CPU bus interface connector 3
C200HW-CE012 Bus Connection Unit
Section 4-5