E Fins Response Codes From The Pc Card Unit - Omron SYSMAC C200HW-PCU01 Operation Manual

FINS Response Codes from the PC Card Unit
When an error occurs in a FINS command sent to a PC Card Unit, an error response code is returned. Although
there are other response codes that are given only for certain commands, the following is a list of response codes
common to all commands.
Appendix E
Response code
0103 Transmission buffer full; transmission not possible.
0201 Destination IP address not recognized; transmission not
possible.
0202 Specified Unit nonexistent; transmission not possible.
0301 Network error; transmission not possible.
0401 Command frame not supported (MRC, SRC).
0401 Unsupported FINS frame (Protocol) received.
0501 Routing table setting error; transmission not possible.
0502 Routing table nonexistent; transmission not possible.
0503 Routing table error; transmission not possible.
1005 FINS frame with an incorrect destination received.
1001 Transmission size exceeds 1472 bytes.
2305 IP address cannot be converted; transmission not possible.
Cause
215