PCM 112 Important Information and Pinouts
Special Tools
CDS G3 Interface Kit
DMT 2004 Digital Multimeter
H z TEMP
m A
A
V
H z
mV
IG
OFF
IP
TEMP
A
m A
C O M
V
H z
Spark Gap Tester
Fuel Pressure Gauge Kit
Terminal Test Probe Kit
Important Information
Propulsion Control Module (PCM) Overview
IMPORTANT: Refer also to Section 2B ‑ PCM 112 and Engine Control Overview.
The propulsion control module requires 9.5 VDC minimum to operate. If the PCM should fail, the engine will stop running.
The inputs to the PCM can be monitored and tested by using the computer diagnostic system (CDS G3).
CDS G3 Interface Kit
The PCM controls the following functions and components:
•
Electronic shift control
•
Electronic throttle control
•
Main power relay
Page 2A-2
CDS G3 License Key, Interface, Adapter, and Harness
66165
Measures RPM on spark ignition (SI) engines, ohms, amperes, AC and DC
voltages; records maximums and minimums simultaneously, and accurately
reads in high RFI environments.
4516
Provides a visual indication of spark/coil efficiency.
7513
Tests the fuel pump pressure; can be used to relieve fuel pressure.
2807
Test probes adapt test meter leads to harness connections without damaging
harness terminals. May be used with Computer Diagnostic System (CDS).
7915
© 2018 Mercury Marine
8M0138392
91‑892647A01
91‑850439T 1
91‑881833A03
Bosch P/N MM‑ 46523
8M0138392
90-8M0146617 eng JULY 2018