Uego1_Sensor_Open - Mercury V6 175 Diagnostic Manual

Summary of Fault Correction Possibilities
• Check the O2 sensor fuse. If open, locate the source of the excess current draw. Replace the fuse.
• Inspect the O2 sensor wiring for an open or short, repair as necessary.
• Replace the O2 sensor.
UEGO1_HtrOpnShrt
Fault Type: Horn:
Nonsticky None
Explanation
The oxygen (O2) sensor does not appear to be working properly; the PCM detected a problem when trying to send a signal to
the O2 sensor heater.
Possible Causes
• O2 sensor fuse failed
• Wiring problem
• O2 sensor failed
Summary of Fault Correction Possibilities
• Check the O2 sensor fuse. If open, locate the source of the excess current draw. Replace the fuse.
• Inspect the O2 sensor wiring for an open or short, repair as necessary.
• Replace the O2 sensor.
UEGO1_HtrUprLimit
Fault Type: Horn:
Nonsticky None
Explanation
The oxygen (O2) sensor does not appear to be working properly; the PCM received a signal that is valid, but is higher than
expected. The O2 sensor is getting too hot.
Possible Causes
• O2 sensor fuse failed
• Wiring problem
• O2 sensor failed
Summary of Fault Correction Possibilities
• Check the O2 sensor fuse. If open, locate the source of the excess current draw. Replace the fuse.
• Inspect the O2 sensor wiring for an open or short, repair as necessary.
• Replace the O2 sensor.

UEGO1_Sensor_Open

Fault Type: Horn:
Nonsticky None
Explanation
The oxygen (O2) sensor does not appear to be working properly; the output circuit from the PCM to the O2 sensor is open or
has too much resistance.
Possible Causes
• O2 sensor fuse failed
• Wiring problem
90-8M0146617 eng JULY 2018
Guardian: UFC:
100% 822‑16
Guardian: UFC:
100% 822‑4
Guardian: UFC:
100% 821‑1
Transmission to Helm:
No
Transmission to Helm:
No
Transmission to Helm:
No
© 2018 Mercury Marine
Fault Codes
Freeze Frame Priority:
2
Freeze Frame Priority:
2
Freeze Frame Priority:
2
Page 4A-45