Installing Three-Live Wire Input Power Cables - Huawei MTS9300A Installation Manual

MTS9300A Telecom Power (Claro, Colombia,
MTS9304A-AM10A1)
Installation Guide
Figure 5-17 Installing a 220/380 V AC three-phase four-wire input power cable
(1) ACDB
----End

5.5.2 Installing Three-Live Wire Input Power Cables

Procedure
When changing the input system of the AC power distribution box (PDB), move
the short-circuit copper bar, as shown in the following figures.
Step 1 Remove the insulation cap from the short-circuit copper bar.
Step 2 Install the short-circuit copper bar in the corresponding position and install the
short-circuiting bar as required.
Issue 01 (2021-05-30)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
5 Installing Cables
40