Table of Contents
Advertisement
TCP/IP Panel
The TCP/IP panel connects PCS to a specific device through IP over USB or LAN.
Figure 15.
1.
Click the TCP/IP tab (see figure 15,
2.
In the IP Address/Hostname field (
NOTE: The default IP address is 192.168.254.254.
In the Password field (
3.
NOTE: The factory configured passwords for all accounts on this device hae been
set to the device serial number. In the event of a complete system reset, the
passwords convert to the default, which is extron.
In the Port field (
4.
port if blank.
TIP:
characters.
5.
Click the Connect button (
Comm Port Selection Window
), enter the device password.
3
), enter the port number or leave the field blank. PCS scans for the
4
Select the Show Characters checkbox (
). A new device tab opens.
6
Extron DTP HD DA 4K Series • Product Configuration Software
).
1
), enter the IP address of the desired device.
2
) to display the password
5
23
Advertisement
Table of Contents
