Table of Contents
Advertisement
Exit
Disconnect connected devices and close the application.
From the Software menu, select Exit. If the device tabs are open, the Exit dialog
1.
box opens (see figure 23).
Figure 23.
2.
Click the Close Session(s) and Exit button (
connected devices, close all offline device tabs, and close the software.
Alternatively, click the Cancel button (
Device Menu
The Device menu contains options pertaining to device connection, configuration, and
information (see figure 24). The Device menu can be access by clicking the down-arrow
next to the device name from the Device tab (see
Figure 24.
Save — Saves the current configuration to a configuration file. If this is the first time the
•
configuration is being saved, the Save Configuration As... dialog box opens. Enter
a name and save location for the configuration file.
•
Save As — Saves the current configuration file under a new name and location or as a
template file. When selected, the Save Configuration As... dialog box opens.
Connect and Apply — Upload a saved configuration to the connected device.
•
•
Deploy Configuration to Device(s) — Upload a saved configuration to selected
device(s) on the network.
Disconnect — Disconnect the device from the PCS program and close the Device
•
tab.
Exit Dialog Box
Device Menu
Extron DTP HD DA 4K Series • Product Configuration Software
) to disconnect the software from
1
) to leave the software open.
2
figure 20
on page 25).
27
Advertisement
Table of Contents
