Table of Contents
Advertisement
Internal Web Page
The DTP HD DA 4K series feature an internal web server, displayed as a web page. This
page allows you to monitor and adjust certain settings of the DTP HD DA 4K series via LAN
connection. Use a web browser to view the pages on a PC connected to the device LAN
port.
This section gives an overview of the internal web page, which is always available and
cannot be erased or overwritten. Topics include:
•
•
Accessing the Internal Web Page
To access the internal web page:
1.
2.
3.
4.
5.
Disabling Compatibility Mode
The internal web page does not support compatibility mode in Microsoft
check compatibility view settings:
1.
2.
3.
Accessing the Internal Web Page
Web Page Panels
Connect the DTP HD DA 4K series to a LAN using the rear panel RJ-45 LAN connector
(see figure 3,
on page 4).
J
Open a web browser on a PC connected on the same LAN.
Enter the device IP address in the browser Address field.
NOTE: The default IP address is 192.168.254.254.
Press the <Enter> key on the keyboard. The DA checks if the device is
password-protected and performs one of the following:
•
If the device is not password-protected, the web page opens.
•
If the device is password-protected, enter a user name (user or admin) in the User
Name field and the password in the Password field when prompted.
NOTE: The factory configured passwords for all accounts on this device have
been set to the device serial number. In the event of a complete system reset, the
passwords convert to the default, which is extron.
Click the OK button.
From the Tools menu of the browser, select Compatibility View Settings. The
Compatibility View Settings dialog box opens.
Be sure the Display all websites in Compatbility View checkbox is clear
and the IP address of the DA is not in the list of websites that have been added to
Compatibility View.
Click Close.
Extron DTP HD DA 4K Series • Internal Web Page
Explorer
. To
®
®
29
Advertisement
Table of Contents
