Panel Computer Unit Pcu-3010 - Furuno ECDIS FMD-3100 Installation Manual

2. WIRING
2.1

Panel Computer Unit PCU-3010

2.1.1 Connections to the PCU-3010
Referring to the figure below, connect the PCU to its respective peripherals.
No use
*1
USB1 : RCU-030
USB2 : USB storage or DVD drive
USB3 : 5139U BLACK or
SKB-E3U (keyboard)
USB4 : Connect USB storage or
DVD drive with ext. cable.
*2
C1 port
TTYCSLA-4 or
C2 port TTYCSLA-1Q
C3 port
TTYCSLA-1Q
C4 port
2-4
LAN2
HUB-3000 *4 , Sensor Adapter, or VDR
HUB-3000: DTI-C5E350 VCV cable
Sensor Adapter: FR-FTPC-CY cable
LAN1
To HUB-3000
DTI-C5E350 VCV cable
Connect drain wire of C3 and C4 here.
Serial Interface (C1 to C4)
AIS, GPS,
GYRO, LOG
USB1 to USB4
DisplayPort (DP++)
5
To external monitor* , VDR*
Note: VDR devices must be connected via a frame synchronizer.
*3
: Select AC or DC power supply.
*4
: Use HUB-100 for IEC 61162-450 Ed. 1 complying network.
*5 : Connnect with 3COX-2P-6C cable and supplied DP-VGA
adapter.
*6 : Connect with DVI-D/D S-LINK(5m) cable and Hatteland
Technology make DP-DVI adapter DPM2DVI-DF-A1
(SG300000198).
(cable, adapter: arrange locally)
*2
Tray 1 Tray 1
Tray 0 Tray 0
*1
To ship's earth
Ground cable, IV-1.25sq.
Connect drain wire of C1 and C2 here.
5
, or external monitor with DVI input*
SSD ports (from top)
Tray 1: Chart memory
Tray 0: Program memory
100-230 VAC
24 VDC *3
DPYC-1.5
6
.
*3