Furuno ECDIS FMD-3100 Installation Manual page 44

2. WIRING
2. Peel the paper from the case packing, then attach the case packing to the reverse
side of the cover and the body unit as shown below.
3. Attach the cover to the MC-3000S body unit.
2.2.5 MC-3020/3030D connections
• MC-3020D: Inputs digital signal (8ch contact input). Contact or voltage input is se-
lectable (contact input requires jumper pins).
• MC-3030D: Outputs digital signal (8ch, normal open/close).
Note: Fasten the cable shield with the cable clamp.
2-20
Case packing
Cover (reverse side)
Case packing
Body unit
J6 J6
J4 J4
J5 J5
J2 J2
J3 J3
J1 J1
MPYC-12 MPYC-12
MC1.5-W-L cable MC1.5-W-L cable
MC-3020D/3030D
Case packing
Case packing
IV-1.25sq. (Local supply) IV-1.25sq. (Local supply)