Furuno ECDIS FMD-3100 Installation Manual page 85

Alert No.
ALF ID ALR ID
3015,21 170
3015,22 272
3015,23 277
3015,24 279
3015,25 284
3015,26 450
3015,27 453
3015,28 278
3015,30 380
3016,24 382
3016,25 383
Alert Name, Meaning and Remedy
Name: Lost Position
Meaning: All position data has been lost for more than 30
seconds.
Remedy: Check the connection with all GPS.
Name: Lost UTC Signal
Meaning: Time data of all available GPS sensor has been
not available for more than 3 seconds.
Remedy: Check position sensor, sensor status.
Name: Lost Wind Signal
Meaning: Wind speed/direction data of all available WIND
sensors has been not available for more than 3 seconds.
Remedy: Check the connection with all wind sensors. Al-
so, check sensor status.
Name: Lost COG/SOG SIG
Meaning: COG/SOG data input stopped for three sec-
onds.
Remedy: Check the connection with all GPS sensors. Al-
so, check sensor status.
Name: Lost LOG(BT) SIG
Meaning: SOG data of all available LOG (ground speed)
sensors has been not available for more than 3 seconds.
Remedy: Check the connection with all LOG sensors.
Also, check sensor status.
Name: Lost Heading SIG
Meaning: Heading data of all available gyro has been not
available for more than 2 seconds.
Remedy: Check the connection with all gyro. Also, check
sensor status.
Name: Lost SDME Signal
Meaning: Speed data from all available SDME has been
not available for more than 3 seconds.
Remedy: Check the connection with all SDME. Also,
check sensor status.
Name: Lost LOG(WT) SIG
Meaning: STW data of all available SDME sensors has
been not available for more than 3 seconds.
Remedy: Check the connection with all SDME. Also,
check sensor status.
Name: Lost AIS COM
Meaning: Data from AIS has been discontinued for more
than set time. (Set at installation)
Default: 60 seconds
AIS is turned off, or there is a problem with network.
Remedy: Check the connection with AIS and network.
Name: Lost COG/SOG SIG
Meaning: COG/SOG data input stopped for three sec-
onds.
Remedy: Check the connection with all GPS sensors. Al-
so, check sensor status.
Name: Lost LOG(BT) SIG
Meaning: SOG data of all available LOG (ground speed)
sensors has been not available for more than 3 seconds.
Remedy: Check the connection with all LOG sensors.
Also, check sensor status.
APPENDIX 5 ALERT LIST
Priority/
Category
Warning/B
Warning/B
Warning/B
Warning/B
Warning/B
Warning/B
Warning/B
Warning/B
Warning/B
Caution/B
Caution/B
AP-29