NovaStar MCTRL4K User Manual page 33

Note

The low latency function is supported when the input source is DP or HDMI.

The low latency and Genlock functions cannot be enabled at the same time.

When the low latency function is enabled, the offset of image cannot exceed the size of input source.
Input Source Bit Depth
Set the bit depth of input source, including 8-bit, 10-bit and 12-bit.
Step 1 Run NovaLCT, choose Screen Configuration and enter the Sending Card tab page.
Step 2 Click the drop-down box next to Input Source Bit Depth and choose a bit depth.
Step 3 Click Save System Configuration File and Save.
www.novastar.tech
MCTRL4K LED Display Controller User Manual
30