NovaStar MCTRL4K User Manual page 23

Step 2 Under HDR Parameter Settings, select Enable.
Step 3 Click the drop-down box to select an HDR standard (HDR10 and HLG supported).
Step 4 Set the HDR parameters to adjust the display effect.

When the input source is HDR10, you can drag the sliders to adjust the peak screen brightness, ambient
light and low grayscale mode in real time.
 When the input source is HLG, you can click to select one HLG mode from the 7 modes, namely HLG1
(300 nits) to HLG7 (1700 nits).
Figure 6-15 Selecting Adjust screen effect
Figure 6-16 Adjusting screen effect
www.novastar.tech
MCTRL4K LED Display Controller User Manual
20