Triumph TIGER Service Manual page 72

Ins atio
1. Fit the cam chain and locate the lower end around
the crankshaft gear.
2. Refit the bolt to the centre of the cam chain housing
in the cylinder head, tightening to 10 m.
3. Refit the camshafts (see page 3-12).
TWU
^ i^
Cylinder
Removal
Note:
• The rubbing blades for the cam chain
1. Remove the engine from the frame (see page 9-2).
2. Remove the camshafts (see page
3. Note the position of all tappet buckets and shims
such that they can be refi
Remove all the tappet buckets and shims.
1. Shim
Note:
• To prevent the tappet buckets and shims
Tiger
Service Manual -
Cylinder Head
K
ad
protrude from the crankcase such that
removal of the head while in the frame is
made extremely difficult and - may lead to
damage to the head, rubbing blades and
frame.
ed in the same positions.
tt
from becoming mixed, place the shim and
tappet together in a marked container. The
components must be refitted- in their
original positions.
3-10).
3.17