Triumph TIGER Service Manual page 453

Electrical
Rear Lighit
Note:
® The rear light is a sealed
and must be replaced in
failure.
Removal
1. Remove the seat (see page 16-9).
2. Disconnect the battery, negative (black) lead first.
3. Remove the rear panel (see
4. Release the two fixings securing the seat lock
mechanism to the subframe
mechanism.
1.Seat lock mechanism
2. Fixings
5. Disconnect the wiring harness.
17.14
for life LED unit
the
event of a
page
16-10).
and
detach the seat lock
Service Manual - Tiger er
6. Release the three fixings securing the rear light unit
to the rear mudguard.
2. Fixings
7. Release the light from the rear mudguard and
remove the assembly upwards.
Installation
1. Installation is the reverse of the removal procedure,
noting the following:
Note:
• Tighten
the rear light fixings to 4 Nm.
rear panel
• Tighten the
9Nm.
• Connect the battery positive
9
bracket fixings to
(red)
lead first.
UMP