Inspection; Installation - Triumph TIGER Service Manual

Transmission

Inspection

Examine all components for damage and/or wear,
1.
paying particular attention to the selector forks and
selector drum. Replace any parts that are damaged
and/or worn.
Gtar selector fork thickness
Standard
limit
Service
Gear selector groove width
Standard
Service limit
Selector fork to groove clearance
0.55 mm max.
2. Examine the gear change shaft seal for damage and/
or wear. Replace the seal if damaged and/or worn.
7.8
5.80 - 5.90 mm
5.70 mm
6.00 - 6.10 mm
6.25 mm
I
Manual - Tiger
Service

Installation

Note:
The detent wheel is keyed to the selector
•
drum
1. Position the selector drum into the crankcase.
kakn
Locating the Selector Drum
2. Using clean engine oil, lubricate the selector drum
hParina_
Position the bearing into the crankcase recess and
3.
engage with the selector drum.
Refit the bearing retainer. Secure with a new bolt
4.
and tighten to 12 Nm.
1. Bearing retaining bolt
5. Fit the detent wheel engaging the wheel with the
locator pin in the selector drum. Tighten a new fixing
to 12 Nm.
O
UMW