Triumph TIGER Service Manual page 255

Fuel Syste rn( ngine Management
1. Fuel filler drain hose
2. Fuel tank vent hose (connects to roll-over valve &
a
marked with
white paint dot)
11. Remove the fuel tank,
10.100.
Installation
Note:
• If removed, ensure the
1. Position the
2.
Connect the two breather hoses as noted prior to
removal.
1. Fuel filler drain hose
2. Fuel tank vent hose (connects to roll-over valve
marked with a white paint dot)
3.
Reconnect the fuel pump electrical connection.
4.
Reconnect the fuel
5.
Raise the rear of the fuel tank and reconnect the fuel
feed hose by gently pushing inwards until the hose
engages with a click.
6.
Align the fuel tank to the front mounting point and
tighten the fixing to 9 Nm.
7.
Align the fuel tank to the rear mounting points and
tighten the two fixings to 9 Nm.
8.
Refit the fairing infill panels (see page 16-11).
9.
Refit the side panels (see page 16-10).
10. Refit the side fairings (see page 16-13).
11. Reconnect the battery, positive (red) lead first.
12. Start the engine and check carefully for fuel leaks.
Rectify as necessary.
13. Refit the seat (see page 16-9).
Service Manual - Tiger
fuel
is installed prior to fuel tank installation.
fuel tank to the mounting points.
level
sender electrical connection.
tank front cover
UMP