Triumph TIGER Service Manual page 291

1 1
I I
1. 0-ring/groove
3. Tighten the bolts to 12 Nm.
Reconnect the top hose clips.
4.
Reconnect the battery, positive (red) lead first.
5.
Remove the seat (see page
6.
7. Refill the cooling system (see page
11.8
16-9).
11-5).
Service Manual - Tiger
Removal
1. Remove the seat (see page
2. Disconnect the battery, negative (black) lead first.
Do not remove the coolant ` pressure cap when the
engine is hot. When the engine is hot, the coolant inside
the radiator is hot also under pressure. Contact with
and
the pressurised coolant will cause scalds and skin
damage.
3. Drain the coolant (see page 11-4).
4. Disconnect the top hose at the radiator.
1. Top hose
5. Disconnect the bottom hose, expansion tank and
bypass hose from the radiator.
1.Bottom hose
2. Expansion tank hose
3. Bypass hose
16-9).
lliN[t