Triumph TIGER Service Manual page 403

Brakes
• .
Fault Code
C1651; C1652; C1653
Pinpoint Tests
Test
1 Check the motor function:
Check that with the motorcycle stationa
and the ABS ACM modulator connected,
the motor does not operate.
2 Check the ABS motor circuit fuse (fuse 2 in
ABS fuse bo
x)
3 Check cable continuity: With Ignition 'ON',
check voltage between:
- ABS ECM connector pin 9 and Ground
4 Check cable for continuity:
- ABS ECM connector pin 25 and Ground
5 Reconnect ABS ECM harness, clear fault
code and test ABS to verify fault cleared
Circuit Diagram
E--,
Rugulator/Rectifier
X 4.74
OFF; Mot
t
.
Possible cause
Motor circuit fault
Motor runs continually
Motor does not run at a
ll
Result
OK
Motor runs
ry
continually.
OK
Faulty
Same as 'across
ba ery' voltage
tt
Less than 'across
ba ery' voltage
tt
OK
Faulty
OK
Fault still present
N
Service Manual - Tiger
_______
ON
Action
Ensure ABS ECM connector is secure.
Turn the ignition 'ON'.
Proceed to pinpoint test 1:-
Action
Proceed to test 2
Contact Triumph service
Proceed to test 3
Replace fuse and proceed to test 5
Proceed to test 4
Locate and rectify wiring fault, proceed to test
5
Proceed to test 5
Locate and rectify fault, proceed to test 5
Action complete - quit test
Contact Triumph service
BS Fuse Box
R
Control Module
9
.
IUM^