Nox Calculation; Problem Solving - Kane KANE975 Manual

The water trap has three parts, carefully split off the top part to access
the filter. Carefully remove the filter element and dispose of it, clean the
inside of the filter housing with a suitable soft cloth. Insert a new filter
element onto the spigot in the filter housing and carefully replace the end
cap.

NOX CALCULATION

NOx is a general term pertaining to oxides of nitrogen, the most common
being nitric oxide (NO) and nitrogen dioxide (NO2).
Nitrogen oxides are typically created in the combustion process when
burning fuels at high temperatures.
The KANE975 is able to calculate the values of NOx in the combustion
process in a number of ways depending on your particular configuration
of sensors fitted.
The information below explains the methods used by the KANE975
depending on fitted sensors.
FITTED SENSOR
NO
NO & NO2

PROBLEM SOLVING

If the cause of a fault is not easy to identify then we advise you contact
KANE Customer Service or if outside the UK a KANE Authorised
Distributor. Visit: https://www.kane.co.uk/contact-us
NOX REFERENCE
(PPM)
NO
SUM
NOX REFERENCE (MG/M
NO
User selectable
NO2 (Default)
SUM
NO User selectable
NO2 (Default)
)
3
Page 31