Mitsubishi Electric e Series Service Handbook page 102

[ VII Control ]
• When the capacity control ratio input signal type is 2-10 V
• External analog input signal of 3 V: 0%
• External analog input signal of 9 V: 100%
• External analog input signal of between 3 and 9 V: the percent will be linearly interpolated.
Load ratio
*%: When the compressor frequency drops below 16 Hz, the compressor stops.
The frequency value that causes the compressor to stop varies depending on the outside temperature and water temperature.
HWE1417B
100%
*%
0%
2 V 3 V 9 V 10 V Input voltage
- 93 -
GB