Mitsubishi Electric e Series Service Handbook page 65

[ IV Remote Controller ]
How to Set the Simple Timer
2 4 Time Setting
Hr
AFTER
1. On the normal operation screen, make sure that the simple timer icon is
displayed ( ). If anything other than "SIMPLE" is displayed, select the
1
simple timer by referring to <5>-3(3) (page 59).
2. Press the TIMER MENU button
press toggles between "Set Up" and "Monitor".)
1
3. Press the ON/OFF button
Each press toggles between the time remaining until the unit turns on or
off. ("ON" or "OFF" will appear in the area labeled
• ON timer The unit will start operation when the specified hours have
elapsed.
• OFF timer The unit will stop operation when the specified hours have
elapsed.
4. With "ON" or "OFF" displayed on the screen (
button 11 to set the hours until the unit turns on or off (
• Available Range: 1 to 72 hours
5. To set both the ON and OFF times, repeat Steps 3 and 4.
* Note that ON and OFF times cannot be set to the same value.
6. To clear the current ON or OFF setting: Display the ON or OFF setting (see
step 3) and then press the CHECK (CLEAR) button
where the remaining time was. To use only the ON-timer or the OFF-timer,
make sure that the time setting for the timer that will not be used is set to
"-".
7. After completing steps 3 through 6 above, press the CIR.WATER
4 to save the value.
Note:
The changes will not be saved unless the Mode (BACK) button
before the CIR.WATER button
8. Press the Mode (BACK) button
screen.
9. Press the TIMER ON/OFF button
the timer is running, the remaining time should appear on the screen. Make
sure that the remaining time is displayed on the screen and that it is
correct.
Viewing the Current Simple Timer Settings
5
T M I E
1. Make sure that "SIMPLE" is displayed (
2. Press the TIMER MENU button
screen ( 5 ).
• If the ON or OFF simple timer is running, the current timer value will
appear in the area labeled
• If ON and OFF values have both been set, the two values will appear
alternately.
3. Press the Mode (BACK) button
to the Normal Operation screen.
HWE1417B
Action (On or Off)
3
ON
"– –" will appear if no
*
temperature settings have
1
SIMPLE
been made.
12 , so that "Set Up" appears (
2
to display the current ON or OFF setting.
.)
3
), press the Set Time
3
).
4
10 so that "-" appears
is pressed
2
4 is pressed.
2 to return to the Normal Operation
9 to start the timer countdown. When
Timer Setting
6
R Hr O N
AFTER OFF
1
SIMPLE
1 ).
12 , so that "Monitor" appears on the
.
6
2
to close the monitor display and return
To Turn Off the Simple Timer
Press the TIMER ON/OFF button
appears on the screen (at
). (Each
To Turn On the Simple Timer
Press the TIMER ON/OFF button
area labeled 7
Examples
The two examples below show how the screen will appear when both the ON-
and Off- timers have been set.
Example 1:
The ON-timer is set to 3 hours, and the OFF-timer is set to 7 hours.
button
˚C
Example 2:
The ON-timer is set to 5 hours, and the OFF-timer is set to 2 hours.
˚C
˚C
- 56 -
9
so that the timer setting no longer
7 ).
7
˚C
˚C
9 so that the timer setting appears in the
.
7
Hr ON
AFTER
˚C
˚C
Hr ON
AFTER
When the
timer starts
SIMPLE
2 hours after
Hr
AFTER OFF
the timer
˚C
started
SIMPLE
7 hours after
the timer
SIMPLE
started
Hr
AFTER OFF
When timer
˚C
starts
SIMPLE
2 hours after
Hr ON
AFTER
the timer
started
SIMPLE
5 hours after
˚C
the timer
SIMPLE
started
SIMPLE
SIMPLE
The display will show
the remaining hours
until the unit will turn
off.
The display will show
the remaining hours
until the unit will turn
on.
OFF setting (7 hours)
- ON setting (3 hours)
= 4 hours.
The unit will turn off
and stay off until
restarted.
The display will show
the ramaining hours
until the unit will turn
off.
The display will show
the remaining hours
until the unit will turn
on.
ON-setting (5 hours) -
OFF-setting (2 hours)
= 3 hours.
The unit will turn on
and stay on until
turned off.
GB