Table of Contents
Advertisement
» SEWING PARAMETER
100 thread clamp
110 stitch in stitch
120 backtack or condensed
stitches at seam start
121 A stitch count
122 B stitch count
123 A/B repetition
124 A stitch length
125 B stitch length
126 A/B speed
NR. PARAMETER
»
FOOT STROKE
027 Automatic stroke switch
Automatic stroke switch
028
speed threshold
Automatic stroke switch
029
delay
Speed
010 stitch length 1
020 foot stroke 1
030 thread tension A 1
032 thread tension B 1
041 speed
050 foot pressure
070 foot lift height
135 bobbin thread counter
060 edge value
066 Edge guide hight
DESCRIPTION
The machine will switch over to a higher stroke automatically after a certain time
and revolution speed.
Rotation per minute when switch should take place.
Delay time until stroke switch will occur.
Automatic stroke switch
ON
OFF
074 foot position on stop
077 needle position on stop
021 foot stroke 2
027 automatic stroke switch
according to sewing speed
028 automatic stroke switch
speed threshold
029 automatic stroke switch
delay
031 thread tension A 2
033 thread tension B 2
034 thread tension based
on material thickness
038 2
nd
switched to 2
054 dynamic foot pressure
ADVICE!
Automatic stroke switch parameter 027
The stroke on an alternate machine are normally changed by pressing a
button or with a knee lever. The VETRON can do this also automatically
with the foot pedal. By activating parameter 027 it will activate the
facility. When the machine is run a certain time on the 1
pedal it will automatically change to a higher stroke setting. When you
sew faster than the 1
step the machine will return back to the lower
st
stroke. The time and revolution is adjustable (parameter 028, 029).
OFF
Time
STROKE SIGNAL
VETRON 5400 - CYLINDER ARM MACHINE - INSTRUCTION BOOK
05. PROGRAMMING
04. PROGRAM PARAMETER
039 release tension on
foot lift
150 thread trimming
153 trim stitch tension
158 trim stitches
159 trim stitch length
140 backtack or condensed
stitches at seam end
141 C stitch count
142 D stitch count
143 C/D repetition
144 C stitch length
tension level when
145 D stitch length
nd
stroke
146 C/D speed
-2-14
st
step of the foot
07/2020
37
Advertisement
Table of Contents
