Pre-installation and application warnings
This section highlights important information for this specific firmware and will assist in pricing accordingly, as
START
HERE
well as bringing awareness to any operational or vehicle limitations.
Compatibilities and Requirements
T-Harness
T-Harness is not compatible.
compatible
Vehicle Takeover
Firmware notes
Unless specified otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic connector.
It is important to check that the fuses are positioned correctly in the module. Proper fuse positioning is displayed on each wiring
diagram.
Refer to the "Vehicle connections" following the installation diagram.
Footnotes
[1] Hood pin: The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory hood pin or if
not supported in data.
[2] Siren: The siren is only required when enabling the security features during module flashing.
[3] Virtual Tach: This vehicle does not support a virtual tach. A tach source from the vehicle must be used.
[4] Security-only installations: refer to the "Locating components in the vehicle" section for the optional starter disable connection.
5
933.HYUNDAI1 4.10.195.3 2010 Hyundai Genesis Coupe (Smart Key)
©2021 VOXX•DEI LLC. All rights reserved.
Refer to the Quick Reference Guide section for more details.
Keys
1
Keys required
required for
for operation
programming
0
Need help?
Do you have a question about the Directechs DS3+ and is the answer not in the manual?