Quick Reference Guide - Directechs DS3+ Installation Manual

Quick Reference Guide (customer copy)
Sending commands to your vehicle
Whether you want to remote start the engine, lock/unlock the doors or pop the trunk, there
are 3 possible ways you can send commands to your vehicle, using the:
• Factory remote.
• Aftermarket remote.
• Directed SmartStart application via your smartphone.
If applicable, you can also start the engine remotely by pressing the Lock button 3 times
quickly on your factory remote.
Vehicle takeover with Get In and Go
The takeover feature is NOT available on the Kia Optima or Magentis. The engine will stop
when the door is opened.
Close the vehicle doors, hood and trunk, then press
1
the Remote Start button on the transmitter to start the
vehicle.*
Press the Unlock button on the factory or aftermarket
2
remote.*
Complete the following steps within 45 seconds or the vehicle will shut down.
Enter the vehicle, while making sure the factory remote is
3
inside with you.
Depress the brake pedal for a minimum of 3 seconds then
4
put the car in gear and drive off.
* Icon and remote appearance may differ depending on the model purchased.
23 933.HYUNDAI1 4.10.195.3 2010 Hyundai Genesis Coupe (Smart Key)
©2021 VOXX•DEI LLC. All rights reserved.
Get In and Go
Get In and Go is designed to provide users with easy takeover when entering their Push-to-
Start (PTS) equipped vehicle, once it has been remote started.
Typically, users would have to remote start their vehicle, then get inside and press the PTS
button to perform a takeover. There is therefore a physical action required to drive away.
With Get In and Go, you simply remote start the vehicle, unlock the doors, get in and go...
All that's left to do is put the gear in drive and drive off.
Pit stop/idle mode
Stop the vehicle in a safe parking spot and put the gear
1
in Park (P).
Press the Remote Start button on the transmitter.*
2
Press Remote
The parking lights will flash once to indicate the vehicle is
Start button*
now in Pit Stop Mode.
It is safe to leave the engine running and exit the vehicle
Press Unlock on
either remote* with the factory remote in hand.
3
Note: We recommend that you always lock the doors of
your vehicle when leaving it unattended.
* Icon and remote appearance may differ depending on the model purchased.
14:36
Enter vehicle
with remote
Ready to
drive off
14:36
14:36
Put
gear in
Park
&
Parking lights flash x1
Press Remote
Start button*
14:36
Exit vehicle
with remote