Digi ConnectPort X4 IA Quick Start Manual

Quick Start Guide
ConnectPort® X4 IA Cellular
1

Verify your components

ConnectPort X4
XBee antenna
Verify that you have all included equipment. If any item is missing or damaged, contact your supplier.
2

Insert SIM card(s)

Note If your device uses a SIM card, you must insert the SIM card. If your device does not use a SIM card, you can skip this step.
1. Remove the SIM slot cover plate.
2. Insert SIM card(s) as shown. Insert the end of the SIM card with the chamfered corner first.
Install the primary SIM card in the upper SIM slot with the contacts face down.
n
Install the secondary SIM card in the lower SIM slot with the contacts face up.
n
3. Reattach the SIM slot cover plate when finished.
© 2018 Digi International Inc.
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United States and other countries worldwide. All other trademarks mentioned in this
document are the property of their respective owners.
Welcome to your Digi product
Get started: This guide helps you with initial product setup. Need more? Find additional
product support at www.digi.com/support/ConnectPortX4. Or connect to the online
documentation by scanning this code:
Digi Technical Support: Digi offers multiple support plans to help you get the most out of your
product. For information on Technical Support plans and pricing, contact us at 877.912.3444 or
visit www.digi.com/support.
Documentation Feedback: To provide feedback on this documentation, send your comments
to techcomm@digi.com.
DIN rail mounting bracket
Direct mount antennas
# of Direct mount
Part number antennas
X4-xxx-P01-x 1
All other models 2
Ethernet cable