Digi XLR PRO Getting Started Manual page 10

4 Setup up Radio 1:
a Power on Radio 1.
b Launch XCTU.
c Click
d Select the following:
Serial/USB port: Select the port to which you've connected Radio 1.
Baud Rate: Select 9600.
Data Bits: Select 8.
Parity: Select None.
Stop Bits: Select 1.
Flow Control: Select None.
e Click Finish. XCTU discovers the XLR PRO and displays it in the list of radio modules.
f In the list of radio modules, click the XLR PRO. XCTU reads and displays the XLR PRO
configuration.
XLR PRO Getting Started Guide
. The Add a radio device dialog appears.
Set up a pair of XLR PROs
10