Test Serial Communications - Digi XLR PRO Getting Started Manual

e Configure the following parameters:
ID: Set the Network ID to match the ID you set for Radio 1.
PL: If Radio 1 and Radio 2 are positioned close together (that is, there is a minimum of one to
two meters distance between the radios, set the power level to 0 (Lowest).

Test serial communications

1 Switch both XCTUs to console mode:
a In the XCTU that includes Radio 1, click
b In the XCTU that includes Radio 2, click
2 In the console window of Radio 1, type in some sample text. The text is displayed in the console
window of Radio 2. To test two-way communications, type sample text in the console of Radio 2,
and the text is transmitted and displayed in the console of Radio 1.
XLR PRO Getting Started Guide
Radio 1 Console
. Then click to open a serial connection.
. Then click to open a serial connection.
Radio 2 Console
Test serial communications
12