Extron electronics DTP3 T 202 User Manual page 26

X! = Status
0 = Off/Disabled
1 = On/Enabled
X@ = Remote power
0 = Remote power disabled
1 = Remote power (48 VDC enabled)
X# = Unit name text string up to 24 characters
Default = DTP3-T-202 or DTP3-R-201
Alphanumeric characters and hyphens only.
No distinction between upper and lower case.
No spaces.
First character must be a letter and the last character cannot be a hyphen.
X$ = Verbose mode
0 = Clear/none (default)
1 = Verbose mode
2 = Tagged responses for queries
3 = Verbose mode and tagged responses for queries
X^ = Video output 1 to 2
X& = Input HDCP status
0 = No video/source detected
1 = Video/source detected, without HDCP
2 = Video/source detected, with HDCP
X* = Output HDCP status
0 = No sink detected
1 = Sink detected, output not HDCP encrypted
2 = Sink detected, output HDCP encrypted
X( = HDCP output mode
1 = (Default) Encrypt as required by input. Continuous trials for HDMI sinks,
attempt for 10s on DVI sinks (then fail).
2 = Always encrypt. Continuous trials for HDMI sinks, attempt for 10s on DVI
sinks (then fail).
X1! = 128 or 256 Byte EDID raw HEX (text form) from currently assigned EDID.
X1@ = Native resolution and refresh rate from currently assigned EDID.
For example: 1920x1080 @ 60 Hz
X1# = 5V output mode
1 = Auto (5 V enabled when source with 5 V present, else off)
2 = 5 V always enabled (default)
X1$ = DTP/HDBT switch status
1 = DTP mode
2 = HDBT mode
X1% = Password: Maximum length 128 characters. All alpha-numeric characters permitted
except |, and "space". Passwords are case-sensitive and cannot be a single
spaced.
DTP3 T 202 / DTP3 R 201 • SIS Configuration and Control 18