Extron electronics DTP3 T 202 User Manual page 31

For firmware, click the Firmware link (
3. If there is no direct link to your software, click the Software link (
4.
Scroll down to the alphabetic navigation bar (see figure 15).
Figure 15. Software Installation
5. Click the appropriate letter to locate the software or firmware.
Click Download and follow the on-screen instructions (see figure 16,
6.
Figure 16. PCS Software Download
For Firmware:
Figure 17. Product Firmware
a. Click the letter D from the alphabetic navigation bar.
b. Scroll down the page to find the firmware for the DTP3 R 201.
NOTE: Firmware will only be listed if your device has a firmware update.
c. (Optional) Click Release Notes (see figure 17,
firmware update.
d. Click Download (
2
e. Enter the required user information and click Download. An executable (.exe) file is
downloaded to the PC. Run this program to place the firmware on the PC for future
use. Make a note of the folder where the firmware file was saved.
7. Install the software.
a.
Navigate to the folder where the software file was downloaded.
b. Double-click the executable file and follow the on-screen directions to install the
software.
For Firmware:
To install via PCS, see Update Firmware in the
).
4
). The product download screen opens.
Device
DTP3 T 202 / DTP3 R 201 • Product Configuration Software
).
2
for PCS).
1
) for more information about the
1
Menu.
23