Furuno FAR21x7 & BB FAR28x7 Operator's Manual BB FAR28x7 Operator's Manual page 92

1. RADAR OPERATION
5. Roll the wheel to choose "2" and then push the wheel or the left button.
6. Roll the wheel to choose function desired and then push the wheel or left
button.
7. Push the right button twice to close the menu.
Item
[ECHO]
PICTURE
IR
ES
EAV
NOISE REJ
ANT SELECT
PULSE LENGTH
A/C SEA SELECT
AUTO RAIN SELECT
TUNE SELECT
ANT HEIGHT
SEA CONDITION
ND
2 ECHO REJ
PM
SART
[STD KEY]
ALARM ACK
STBY TX
HL OFF
EBL OFFSET
OFF CENTER
CU TM RESET
INDEX LINE
VECTOR TIME
VECTOR MODE
TARGET LIST
TRAIL
BRILL
MARK
MENU
RANGE UP
RANGE DOWN
ACQ
TARGET DATA
TARGET CANCEL
1-66
Description of function key programs
Chooses picture setup function.
Chooses interference rejection level.
Chooses echo stretch function.
Chooses echo averaging function.
Turns noise rejector on/off.
Chooses antenna.
Chooses pulselength.
Chooses A/C SEA adjustment method.
Chooses AUTO RAIN level.
Chooses tuning adjustment method.
Sets antenna height.
Sets sea condition.
nd
Turns 2 trace echo rejector on/off.
Turns performance monitor on/off.
Turns SART setup conditions on/off.
Acknowledges alarm. (Silences audible alarm.)
Toggles between stand-by and transmit.
Turns heading line on/off.
Offsets EBL.
Off centers the display.
Returns own ship mark to point 75% of range in use.
Turns index line on/off.
Sets vector time.
Sets vector mode.
Displays target list.
Sets trail parameters.
Sets brilliance.
Chooses mark to inscribe.
Opens the MAIN menu.
Raises the range scale.
Lowers the range scale.
Acquires ARP target; activate sleeping AIS target.
Shows target data.
Cancels tracking of ARP target; sleep AIS target.
Description