Furuno FAR21x7 & BB FAR28x7 Operator's Manual BB FAR28x7 Operator's Manual page 123

In the example below, START is 130° and ANGLE is 100°.
ANGLE
(Example: 100°)
9. Select 5 COMBINE RANGE and push the left button.
10. Use the scrollwheel to set START and LENGTH, referring to the example below.
Spin the scrollwheel to set and push it to confirm.
• START:
Set range start point.
• LENGTH: Set length of sector.
Push the right button four times to close the menu.
Width of sector
Example:
START:
LENGTH: 02.00 nm
1. RADAR OPERATION
START
(Example: 130°)
START
LENGTH
01.00 nm
1-97