Furuno FAR21x7 & BB FAR28x7 Operator's Manual BB FAR28x7 Operator's Manual page 247

Message
Other Alarms
CHK INT-SW Continuous
DEPTH Continuous
HEADING SET None
MEMORY FULL Continuous
XTE Continuous
WATCH Continuous
ARRIVAL Continuous
KEY Continuous
RF Continuous
EXT-ERROR Continuous
Work in Progress
TUNE None
INITIALIZE
PM None
USER DEFAULT None
SART None
WR CARD DATA None
RD CARD DATA None
FORMAT CARD None
DELETE CARD None
DATA
POWER ON None
RESTART
System messages (con't from previous page)
Alarm
Image from currently selected antenna becomes lost
Water is shallower than preset depth
Gyro re-set with MODE key
Cross-track error: Ship has crossed over a nav line by a
preset range
Watchman time has elapsed
Ship has arrived to a waypoint
No status data from keyboard
No status data from antenna
An alarm among GYRO, TRIGGER, VIDEO, AZIMUTH
and HEADLINE has been generated at a radar
interfaced via the interswitch.
Tune initialization in progress
Performance monitor is in use
Radar is set up for SART detection
Writing memory card
Reading memory card
Formatting memory card
Deleting file from memory card
Prompt which appears after loading installation settings
from memory card.
6. MAINTENANCE, TROUBLESHOOTING
Meaning
6-13