Video Plotter Operation; General; Display Modes - Furuno FAR21x7 & BB FAR28x7 Operator's Manual BB FAR28x7 Operator's Manual

5.

VIDEO PLOTTER OPERATION

5.1

General

The video plotter
• Plots own and other ships' tracks. (Plotting of other ships' tracks not available
on IMO type.)
• Enters waypoints nav lines and marks
• Records data onto memory cards (optional card interface required).
• It uses two types of memory cards, a memory card (RAM card) for storing own
ship and other ship's tracks and marks, and a digital chart card (ROM card).
• 30 nav lines may be stored and each line may contain up to 30 waypoints.
Five nav lines may be simultaneously shown on the display. 200 waypoints are
available. Own ship and other ship tracks may be stored at a selected interval.
• Charts (B, C and W types) are superimposed on the radar picture without
disturbing the radar observation. The chart area is dependent on the radar
range in use.
5.2

Display Modes

This radar has two display modes: Radar and Radar + Video Plotter. Use the
DISPLAY MODE box to choose a mode. (When the video plotter mode is
displayed more than five seconds, the radar automatically goes into standby.)
Note 1: Display mode cannot be chosen when the menu is open. Close the
menu to choose a display mode.
Note 2: Only the radar display is available on the IMO-type radar.
5-1