Arp Performance Test - Furuno FAR21x7 & BB FAR28x7 Operator's Manual BB FAR28x7 Operator's Manual

3.16

ARP Performance Test

A test program is provided for assessing overall performance of the ARP. Normal
operation is suspended and the indication "XX" appears at the bottom of the
effective display area during the test. The test may be terminated at any time.
1. Roll the trackball to choose the MENU box and then push the left button.
2. Roll the wheel to choose 9 [CUSTOMIZE•TEST] and then push the wheel or
the left button.
3. Roll the wheel to choose 8 [TEST] and then push the wheel or the left button.
4. Roll the wheel to choose 3 [ARP TEST].
[CUSTOMIZE•TEST]
1 BACK
2 [DATA BOX]
3 [F1]
4 [F2]
5 [F3]
6 [F4]
7 [OPERATION]
8 [TEST]
CUSTOMIZE•TEST menu
[TEST]
1 BACK
2 [SELF TEST]
3 [ARP TEST]
TEST menu
[ARP TEST]
1 BACK
2 ARP TEST START
NOTE:
THE DISPLAY IS
CLEARER WHEN
RUNNING ARP TEST.
RUN ARP TEST?
YES: SELECT 2 START
NO: SELECT 1 BACK
ARP TEST menu
3. ARP OPERATION
3-33