Hardware Installation; Wf-2000 Series Connection Setting; Wf-2000 Series Connection Configuration - ICP DAS USA WF-2000 Series User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

4.1 Hardware Installation

Before use, associated hardware configuration, the steps described as
follows：
Step 1: Checking the WF-2000 series firmware operation mode
It needs to set the DIP switch to the "OP" position (operating mode),
as resetting the power, WF-2000 series will be in the operation mode.
Step 2: Serial port connection
WF-2000 series supports RS-232 serial communication. The circuit
configuration is as shown in Figure 2-5.
If you do not need parameter setting, this step can be omitted.
Step 3: Power connection
Connect the power supply to WF-2000 series' power terminator, as
shown in Figure 2-5.

4.2 WF-2000 series connection setting

4.2.1 WF-2000 Series Connection Configuration

WF-2000 Series Wi-Fi I/O
Figure 4-3: Connection Configuration
User's Manual (Ver. 1.0, Sep./2012) ------------- 35