Hardware Installation - ICP DAS USA PISO-813 Series User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
PISO-813 Series Card
32-channel Single-Ended Isolated A/D Board

3. Hardware Installation

Note:
It's reco e ded to i stall dri er first, si ce so e operati g syste
may ask you to restart the computer again after driver installation. This reduces the times to
restart the computer.
To install the PISO-813 series card, follow the procedure described below:
Step 1: Installing PISO-813 series card driver on your computer first.
Step 2: Configuring Card ID by the SW1 DIP-Switch for PISO-813U only.
such as Wi do s 2000
For detailed information about
the driver installation, please
refer to
Installation.
For detailed information about the card ID
(SW1), please refer to
Switch .
User Manual, Ver. 1.5, Feb. 2014, PMH-003-15, Page: 13
Chapter 4 Software
Sec. 2.2 Car ID