Parameter Transmission Interface - ICP DAS USA WF-2000 Series User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
AP Mode：
AP：Use the wireless access point way for connection and transmission.
Wi-Fi Mode
Service Set Identifier: Connected devices must be with the same SSID, SSID
SSID
length must not exceed 20 characters.
0~13：Wi-Fi transmission channel setting, connected devices must with the
WLCH
same channel.
NONE / WEP64 / WEP128 / WPA / WPA2: Encryption of Wi-Fi, connected
Encryption
devices must with the same encryption.
Key of Encryption，connected devices must with the same Key.
WEP-64 ：Key length must be 10 characters.
WEP-128：Key length must be 26 characters.
WLK
WPA
WPA2
Characters of key should be in range of: [0 ~ 9] or [A ~ F] or [a ~ f].
Ad-Hoc Mode：
Ad-Hoc：Use Ad-Hoc connectivity with another WF-2000 series or Wi-Fi
Wi-Fi Mode
devices to create AD-hoc wireless network.
Service Set Identifier: Connected devices must be with the same SSID, SSID
SSID
length must not exceed 20 characters.
1~13：Wi-Fi transmission channel setting, connected devices must with the
WLCH
same channel.
NONE / WEP64 / WEP128: Wi-Fi Encryption of Wi-Fi, connected devices
Encryption must with the same encryption.
Not Support WPA WPA2 encryption in Ad-Hoc mode
Key of Encryption，connected devices must with the same Key.
WEP-64 ：Key length must be 10 characters.
WLK
WEP-128：Key length must be 26 characters.
Characters of key should be in range of: [0 ~ 9] or [A ~ F] or [a ~ f].

Parameter Transmission Interface

WF-2000 series' parameter connection configuration interface
provides wireless and RS-232 interface for connection.
Figure 3-15: Parameter Transmission Interface
WF-2000 Series Wi-Fi I/O
(Must have Wi-Fi AP)
：Key length must between 8~64 characters.
：Key length must between 8~64 characters.
User's Manual (Ver. 1.0, Sep./2012) ------------- 29