Features Description - ICP DAS USA WF-2000 Series User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
1.2.1

Features Description

The WF-2000 module offers the most comprehensive configuration to
meet specific application requirements. The following list shows the
features designed to simplify installation, configuration and application.
Compatible with IEEE 802.11b/g standards
WF-2000 module complied with IEEE 802.11b/g standard from
2.4~2.5GHz, and it can be used to provide up to 11Mbps for IEEE
802.11b and 54Mbps for 2.4GHz IEEE 802.11g to connect your wireless
LAN.
Support infrastructure and ad hoc modes for wireless networks
Ad hoc mode lets you create a wireless network quickly by allowing
wireless nodes within range (for example, the wireless devices in a room)
to communicate directly with each other without the need for a wireless
access point.
Infrastructure mode is the more common network configuration where
all wireless hosts (clients) connect to the wireless network via a WAP
(Wireless Access Point).
Support WEP, WPA and WPA2 wireless encryption
WEP and WPA are common types of security that are used to protect
wireless networks. When WEP or WPA is turned on, WF-2000 module
uses a special security key combination to allow only devices that know
this key to connect to its wireless network. This applies to laptops, smart
device, or any other wireless device.
Support Modbus/TCP and UDP protocols
The Modbus/TCP and UDP slave function on the WF-2000 module
can be used to provide data to remote HMI/SCADA software built with
Modbus/TCP driver. ICP DAS also provides NAPOPC_ST DA Server for
Modbus/TCP to integrate WF-2000 I/O series real-time data value with
OPC client enabled software.
WF-2000 Series Wi-Fi I/O User's Manual (Ver. 1.0, Sep./2012) ------------- 6