ICP DAS USA WF-2000 Series User Manual page 43

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Figure 4-16: Module configuration interface
Pair connection setting
01、Set the Remote IP as "192.168.255.1".
02、Set the Remote Port Number as "502".
03、Set the Remote Net ID as "1".
04、Set the Scan Time as "500" ms.
05、Set the Local DO Base address as "0".
06、Set the Remote DI Base address as "0".
07、Set the I/O count as "8".
08、Set the communication Timeout as "3000" ms.
09、Set the I/O Pair Connection to "Enable".
11、Finally, click the "Write Para." button to take the parameters effect.
Figure 4-17: Pair connection setting interface
WF-2000 Series Wi-Fi I/O User's Manual (Ver. 1.0, Sep./2012) ------------- 43