System Configuration - Mitsubishi Electric RV-FR Series Instruction Manual

System configuration

8.2.2
Robot system 1 detects "human approach" and "human presence" as follows.
"Human presence" is detected by safety sensor 1A (such as a light curtain).
"Human approach" is detected by safety sensor 1B (such as a safety switch (door), laser scanner, and safety
mat).
Robot system 2 detects "human approach" and "human presence" as follows.
"Human presence" is detected by safety sensor 2A (such as a light curtain).
"Human approach" is detected by safety sensor 2B (such as a safety switch (door), laser scanner, and safety
mat).
Construct a safety system with the following CC-Link IE TSN devices.
No. Station
<1> Master station
(station No.0)
<2> Remote station
(station No.1)
<3> Remote station
(station No.2)
<4> Local station
(station No.3)
<5> Local station
(station No.4)
* Connect devices to the safety inputs of the safety remote I/O module (Item No.2) as follows: safety sensor 1A
to the safety inputs X0 and X1, safety sensor 1B to the safety inputs X2 and X3, and emergency stop switch 1
to the safety inputs X4 and X5.
* Connect devices to the safety inputs of the safety remote I/O module (Item No.3) as follows: safety sensor 2A
to the safety inputs X0 and X1, safety sensor 2B to the safety inputs X2 and X3, and emergency stop switch 2
to the safety inputs X4 and X5.
* The programmable controller CPU module does not perform safety communication (standard communication
possible).
* The safety IO process uses the safety remote I/O module's double input discrepancy detection function, input
dark test function (test pulses), and input response time setting function (filters for noise and chattering).
Table 8-10 Safety system components
Product [model]
Safety CPU set
[RnSFCPU-SET]
Master/local module
[RJ71GN11-T2]
Safety remote I/O module
[NZ2GNSS2-16DTE]
Safety remote I/O module
[NZ2GNSS2-16DTE]
Programmable controller CPU module
[RnCPU]
CR800-R controller × 3
Master/local module
[RJ71GN11-T2]
Programmable controller CPU module
[RnCPU]
CR800-R controller × 2
Master/local module
[RJ71GN11-T2]
8 SYSTEM APPLICATION EXAMPLES
Detailed product [model]
Safety CPU module
[RnSFCPU]
Safety function module
[R6SFM]
-
-
-
-
Robot CPU module
[R16RTCPU]
Controller
[CR800-R]
-
-
Robot CPU module
[R16RTCPU]
Controller
[CR800-R]
-
Application Example 2 8-119