Augment3D Control Mode - ETC Ion Classic User Manual

Augment3d Control Mode

Control Mode is the default Augment3d view, allowing for visualization and navigation of
your space, fixtures, and objects.
Collectively, the Augment3d virtual environment is referred to as the model. All fixtures and
objects must be part of the model in order to be configured.
In Control Mode, a command line can be toggled on or off on a connected Augment3d tether.
For more information, see
Toolbar
Limited toolbar options are available in Control Mode:
Camera Tool (on page 488)
•
Focus Tool (on page 489)
•
Labels Tool (on page 489)
•
Sticks Tool (on page 490)
•
Light Tool (on page 490)
•
Options Tool (on page 490)
•
472
Tether Command Line (on page 469) .
Ion Classic User Manual