Hydraulic Wing Folding Tempo F; Switching Between Transportation Mode And Working Mode - Vaderstad E-Services TPF Series Instructions Manual

Hydraulic wing folding Tempo F

14 Hydraulic wing folding Tempo F
14.1 Switching between
transportation mode and
working mode
Switching between transportation mode and working
mode must take place on level ground with an even
surface. The basic model of the machine is adjusted
manually. It can be adjusted hydraulically using optional
equipment.
If the machine is in working mode when the terminal is
started, press to display the home screen.
Figur 14.1
If the machine is in transportation mode when the
terminal is started, wing folding mode is displayed; see
"Figur 14.1 ". Fold out the wings as follows:
1. Press the wing folding button for three seconds. The
transportation mode button is displayed.
2. Fold out the wing sections manually or with the
hydraulic lever for wing folding. The home screen
button is displayed.
3. Press the home screen button.
42
14.1.1 Switching between transportation mode
and working mode
Figur 14.2
1.
machine so that it moves free of the ground and start
the terminal.
2. Release the locking pin from position (A).
- If the machine is equipped with hydraulic wing
folding, release pin (A) on both sides.
A A
B
Lift up the
903075-en-gb; 07.06.2017