Table of Contents
Advertisement
Basic Settings
The yellow dotted lines in (B) show the row units that
will be sowing and the white solid lines show the row
units that will be shut off due to the tramlining.
The above example shows that row unit 3 will be shut off
during bouts 2 and 3 due to the tramlining.
6.4.4
Changing a suggested tramline
Figure 6.8
Changes to the tramline program can be made by
shutting off one or more row units in bouts where
tramlining tracks are to be laid.
A. Row units
B. Arrows used to scroll through the various bouts of
the tramline program.
C. Cancel
D. Accept
E. Add a bout to the tramline program.
F. Remove a bout from the tramline program.
G. Open a saved tramline program.
H. Save the current tramline program.
I. Displays whether the row unit will be sowing or
turned off for each bout.
To change a suggested / create a tramline:
•
Select which row unit(s) is/are to be shut off during
tramlining by pressing on the row unit(s). When
marking the row unit, it switches between tramlining
(wheel tracks) or normal sowing.
•
Press (E) for additional bouts and (F) to reduce the
number of bouts.
•
Confirm the change by pressing (D) To undo
changes, press (C).
For successful tramlining, it is very important to
think through where they are going to be before
starting work.
6.4.5
Save the tramline program
It is possible to save up to 10 tramlining programs.
14
Press (H) in the previous tramlining selection screen
Figure 6.9 Name a tramline program
Name the tramline program to be saved and press (B).
Press (A) to cancel.
6.4.6
Open a tramline program
Press (G) in the previous tramlining selection screen
Figure 6.10
The available tramline programs are displayed here. The
final figure indicates the number of rows on the machine
that the program is intended for. The number is
automatically appended to the name when the program is
saved. It is important that the program chosen is
consistent with the current number of rows on the
machine to be employed.
Figure 6.11
If the selected program agrees with the configured
settings of the machine and its number of row units, then
it will be highlighted in green.
903075-en-gb; 07.06.2017
Advertisement
Table of Contents
