4.4
Check of wing folding ram piston rod heads
A
Figure 4.4
Check that the lock nuts (A) to the wing folding ram piston rod heads are tightened at least once
per season. If the lock nuts come loose, there is a danger that the ram pipes will rotate, changing
the stroke length of the cylinders. This will produce in an uneven work result.
For adjustment, see "2.7 Setting wing section horizontal alignment" on page 24.
NOTE!
Distance (B) may not exceed 45 mm after adjustment.
NOTE!
If this check and tightening is not carried out, the cylinders may come free from the wing
sections, potentially resulting in serious personal injury!
01.05.2015 1
B=Max 45 mm
CRX 425-625
35